MORE ABOUT THE THERMIC WOMENS HEATED POWER SKI GLOVES .
Do you suffer from cold hands skiing or do you have Reynards which is equally painful!? Don't suffer any longer with Thermic Heated Power Ski gloves. Designed specifically for cold hand sufferers with the cold. The Heated Power Gloves provide up to 10 hours heat and have 3 different heat settings. Comes with a USB charger.
High-quality fabrics consisting of DRYZONE™ and PRIMALOFT® insulation technology
Ultra-lightweight lithium-ion batteries providing up to ten hours of heat
A single button to select one of three settings
Impermeable zip fastenings, a drawstring and flexible cuffs
USB charger
Instructions for use, to help you understand how they work.
Press and hold down the function button (1.2) (for
approx. 3 seconds) to set the Therm-ic PowerGloves
to the lowest heating level. If the button is pressed
for more than 6 seconds, the gloves will go into
safety mode and switch off.
Changing the heat setting:
Pressing the function button once (for approx.
1 second) will increase the heating setting (level 1,
level 2 or level 3).
• Level 1: 1 flash, low heating setting.
• Level 2: 2 flashes, medium heating setting.
• Level 3: constant light, high heating setting.
Turning the device OFF:
To switch off the Therm-ic PowerGloves, press and
hold the function button (1.2) (for 3 seconds, until the
heating level indicator light switches off).
IMPORTANT INSTRUCTIONS FOR USE
• Charge the batteries before each use.
• When switching on the Therm-ic PowerGloves, do
not leave them set to level 3 for more than a few
minutes; continuous use at this setting risks raising
the temperature excessively and may cause burns.
• Always set the Therm-ic PowerGloves to the
level 1 or level 2 setting to keep your fingers at
a comfortable temperature (the warming effect
should be practically imperceptible).
• The optimum heating temperature is reached when
the gloves are dry.
HEATING SETTINGS
Level Heating duration per charge
1 8-10 hours
2 4-5 hours
3 2-2,5 hours
Measurements made under laboratory conditions
directly on the heating element. The heating duration
per charge depends on the heating level selected, the
ambient temperature
